An Intelligent Controller of Nonlinear Conical Tank Water Level System
Abstract
Full text article
References
Sung, S.W.; and Lee, I.-B. (1996). Limitations and countermeasures of PID controllers. Industrial & Engineering Chemistry Research, 35(8), 2596-2610.
Ziegler, G. and Nichols, N. B,”Optimum settings for automatic controllers”, Trans. ASME, 64,759-768,
Astrom, K J.;.Hagglund .T, , “ Automatic tuning of simple regulators with specifications on phase and amplitude margins”, Automatica, 20,645- +a651, 1984.
G.H Cohen and G.A Coon: “Theoretical Consideration of Retarded Control “, Trans ASME 75, pp.827/834,1953.
O.Safarzadeh, A.Kahki Sedigh and A.S.Shirani, ‘Identification and robust water level
control of horizontal steam generators using quantitative feedback theory’, Energy
conversion and Management, vol.52, pp.3103-3111, 2011.
S.Nithya, N.Sivakumaran, T.K.Radhakrishnan and N.Anantharaman” Soft Computing Based Controllers
Implementation for Non-linear Process in Real Time” Proceedings of the World Congress on Engineering
and Computer Science (WCECS ) 2010, Vol – 2.
S. Mouleeswaran, Development of Active Suspension System for Automobiles using PID Controller, Proceedings of the World Congress on Engineering 2008 Vol II WCE 2008, July 2 - 4, 2008, London, U.K.
http://www.linuxcnc.org/docs/2.4/html/common Integrator Concepts.html.
H. Imine, A. Benallegue, T. Madani and S. Srairi, “Rollover risk prediction of an instrumented heavy vehicle using high order sliding mode observer”, 2009 IEEE International Conference on Robotics and Automation, Kobe, Japan.
The MathWorks Inc . ”Fuzzy Logic Toolbox for use with MATLAB”, The MathWorks Inc., 2004.
http://www.scribd.com/doc/22786677/Quarter-Car-Vehicle-Suspension system-Using-Fuzzy-Logic-controller.
Gao, W.Zhang, N.Du, H. P.”A half-car model for dynamic analysis of vehicles with random parameters” The fifth Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, Vol.149, No. 163.
pp.595-600, December 10-12, 2007.
Authors
- The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
- Attribution: other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
With the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
- The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post online a pre-publication manuscript (but not the Publisher's final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
- Upon Publisher's request, the Author agrees to furnish promptly to Publisher, at the Author's own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
- The Author represents and warrants that:
- The Work is the Author's original work;
- The Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
- The Work is not pending review or under consideration by another publisher;
- The Work has not previously been published;
- The Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
- The Work contains no libel, invasion of privacy, or other unlawful matter.
- The Author agrees to indemnify and hold Publisher harmless from Author's breach of the representations and warranties contained in Paragraph 7 above, as well as any claim or proceeding relating to Publisher's use and publication of any content contained in the Work, including third-party content.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Article Details
